Description
Özellikler ve sipariş bilgisi
Ordering Information
Sensor Heads
(Connection Cable between Preamplifier and Amplifier Unit is not provided with the Sensor Head. Be sure to have the Connection Cable ready when using the Sensor.)
| Type | Appearance | Measuring range (Moving range) |
Resolution | Order code |
|---|---|---|---|---|
| Straight type |  |
5 mm | 0.1 μm | E9NC-TH5S 2M |
| Right-angle air type |  |
E9NC-TH5L 2M | ||
| Flanged type/Straight type |  |
E9NC-TH5SF 2M | ||
| Flanged type/Right-angle air type |  |
E9NC-TH5LF 2M | ||
| Straight type |  |
12 mm | E9NC-TH12S 2M | |
| Right-angle air type |  |
E9NC-TH12L 2M | ||
| Flanged type/Straight type |  |
E9NC-TH12SF 2M | ||
| Flanged type/Right-angle air type |  |
E9NC-TH12LF 2M |
Amplifier Units
| Type | Appearance | Order code |
|---|---|---|
| Communications |  |
E9NC-TA0 |
| Type | Appearance | Order code | |
|---|---|---|---|
| NPN output | PNP output | ||
| ON/OFF output |  |
E9NC-TA21 2M | E9NC-TA51 2M |
Connection Cable between Preamplifier and Amplifier Unit
| Cable length | Quantity | Order code |
|---|---|---|
| 0.5 m | 1 | E9NC-TXC05 |
| 5 m | 1 | E9NC-TXC5 |
| 10 m | 1 | E9NC-TXC10 |
| 20 m | 1 | E9NC-TXC20 |
Accessories (Sold Separately)
Sensor Head Accessories
Probe
The E9NC-TB1 is provided with the Sensor Head. Order replacements as required.
| Type | Appearance | Quantity | Order code |
|---|---|---|---|
| 3-dia. probe |  |
1 | E9NC-TB1 |
| Nylon probe |  |
1 | E9NC-TB2 |
| Probe for flat surfaces |  |
1 | E9NC-TB3 |
Rubber boots
A rubber boot is provided with the Sensor Head. Order replacements as required.
| Applicable Sensor Head | Quantity | Order code |
|---|---|---|
| E9NC-TH5⬜ | 1 | E9NC-G5 |
| E9NC-TH12⬜ | 1 | E9NC-G12 |
Amplifier Unit Accessories
Amplifier Unit Mounting Bracket
A Mounting Bracket is not provided with the Amplifier Unit. It must be ordered separately as required.
| Appearance | Quantity | Order code |
|---|---|---|
 |
1 | E39-L143 |
DIN Track
A DIN Track is not provided with the Amplifier Unit. It must be ordered separately as required.
| Appearance | Type | Quantity | Order code |
|---|---|---|---|
 |
Shallow type, total length: 1 m | 1 | PFP-100N |
| Shallow type, total length: 0.5 m | 1 | PFP-50N | |
| Deep type, total length: 1 m | 1 | PFP-100N2 |
End Plate
An End Plate is not provided with the Amplifier Unit. It must be ordered separately as required.
| Appearance | Quantity | Order code |
|---|---|---|
 |
1 | PFP-M |
Cover
Attach these Covers to Amplifier Units. Order a Cover when required, e.g., if you lose the covers.
| Appearance | Quantity | Order code |
|---|---|---|
 |
1 | E39-G22 FOR E9NC-TA |
Related Products
Sensor Communications Units
| Type | Appearance | Order code |
|---|---|---|
| Sensor Communications Unit for EtherCAT |
 |
E3NW-ECT |
| Sensor Communications Unit for CC-Link |  |
E3NW-CCL |
| Distributed Sensor Unit |  |
E3NW-DS |
Refer to your OMRON website for details.
The E9NC-TA0 is supported for firmware version 1.03 or higher (Sensor Communications Units manufactured in July 2014 or later).
EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.
CC-Link is a registered trademark of Mitsubishi Electric Corporation. The trademark is managed by the CC-Link Partner Association.