NX-TC

Yeni nesil kontrolörler

NX-TC, insan müdahalesi olmaksızın optimum ve otomatik sıcaklık kontrolü sağlaması için tasarlanmış yeni nesil kontrolörlerdir. Uzmanlar tarafından sahada yapılan tüm tipik ayarlar artık Yapay Zeka (A.I.) kullanılarak otomatik hale getirilmiştir.

Süreç değişiklikleri nedeniyle kontrol ayarını otomatik olarak optimize eden adaptif kontrol
Daha iyi sızdırmazlık uygulaması (paketleme) ve su soğutmalı ekstrüzyon makineleri (plastik) için özel işlev
ProfiNet, Ethernet-IP ve EtherCAT fieldbus desteği sayesinde daha kolay entegrasyon

İLETİŞİM

Telefon : 0 (232) 449 21 00 | E-posta : satis@hatelgas.com.tr

Description

Özellikler ve sipariş bilgisi

Ordering information

International Standards

The standards are abbreviated as follows: U: UL, U1: UL (Class I Division 2 Products for Hazardous Locations), C: CSA, UC: cULus,
UC1: cULus (Class I Division 2 Products for Hazardous Locations), CU: cUL, N: NK, CE: EU Directives, RCM: Regulatory Compliance Mark, KC: KC Registration, and EAC: EAC Mark.

Contact your OMRON representative for further details and applicable conditions for these standards.

Temperature Control Units

Unit type	Product name	Specification								Standards	Order code
Unit type	Product name	Number of channels	Input type	Output	Output capacity	CT Input capacity	Control type	Conversion time	I/O refreshing method	Standards	Order code
NX Series Temperature Control Unit	Temperature Control Unit 2Ch type	2 Ch	Multi-input (Thermocouple and Resistance thermometer)	Voltage output (for driving SSR)	2 points	2 points	Standard Control	50 m sec	Free-Run refreshing	UC1, CE, RCM, KC, EAC	NX-TC2405
				Voltage output (for driving SSR)	2 points	None	Standard Control				NX-TC2406
				Voltage output (for driving SSR)	4 points	None	Heating and Cooling Control				NX-TC2407
				Linear current output	2 points	None	Standard Control				NX-TC2408
	Temperature Control Unit 4Ch type	4 Ch		Voltage output (for driving SSR)	4 points	4 points	Standard Control				NX-TC3405
				Voltage output (for driving SSR)	4 points	None	Standard Control				NX-TC3406
				Voltage output (for driving SSR)	8 points	None	Heating and Cooling Control				NX-TC3407
				Linear current output	4 points	None	Standard Control				NX-TC3408

Specifications

Item		Specification
Enclosure		Mounted in a panel
Grounding method		Ground to 100 Ω or less
Operating environment	Ambient operating temperature	0 to 55°C
	Ambient operating humidity	10% to 95% RH (with no condensation or icing)
	Atmosphere	Must be free from corrosive gases.
	Ambient storage temperature	−25 to 70°C (with no condensation or icing)
	Altitude	2,000 m max.
	Pollution degree	Pollution degree 2 or less: Conforms to JIS B 3502 and IEC 61131-2.
	Noise immunity	Conforms to IEC 61000-4-4, 2 kV (power supply line)
	Overvoltage category	Category II: Conforms to JIS B 3502 and IEC 61131-2.
	EMC immunity level	Zone B
	Vibration resistance	Conforms to IEC 60068-2-6. 5 to 8.4 Hz with amplitude of 3.5 mm, 8.4 to 150 Hz, acceleration of 9.8 m/s2 100 min each in X, Y, and Z directions (10 sweeps of 10 min each = 100 min total)
	Shock resistance	Conforms to IEC 60068-2-27. 147 m/s² , 3 times each in X, Y, and Z directions
	Insulation resistance	20 MΩ min. between isolated circuits (at 100 VDC)
	Dielectric strength	510 VAC between isolated circuits for 1 minute at a leakage current of 5 mA max.
Applicable standards 1		cULus: Listed (UL 61010-2-201), ANSI/ISA 12.12.01, EU: EN 61131-2, RCM, KC: KC Registration, EAC