Açıklama
Özellikler ve sipariş bilgisi
Ordering Information
Relay Terminals
| Classification | Points | Internal I/O common | Rated voltage | Order code |
|---|---|---|---|---|
| Relay outputs | 16 points (SPST-NO × 16) | NPN (+common) | 24 V DC | G70D-VSOC16 |
| Power MOSFET relay outputs | G70D-VFOM16 |
Note:These are all non-standard model and require a special order. Contact your OMRON representative for details on availability.
Accessories (Order Separately)
Cables for I/O Relay Terminals XW2Z-R
| Type | Order code | ||
|---|---|---|---|
| Cable with Loose Wire and Crimp Terminals | XW2Z-RY⬜C | ||
| Cable with Loose Wires | XW2Z-RA⬜C | ||
| Cable with connectors | Fujitsu connectors | 1:1 | XW2Z-R⬜C |
| 1:2 | XW2Z-RI⬜C-⬜ | ||
| XW2Z-RO⬜C-⬜ | |||
| 1:3 | XW2Z-R⬜C-⬜-⬜ | ||
| MIL connectors | 1:1 | XW2Z-RI⬜C | |
| XW2Z-RO⬜C | |||
| 1:2 | XW2Z-RI⬜-⬜-D⬜ | ||
| XW2Z-RM⬜-⬜-D⬜ | |||
| XW2Z-RO⬜-⬜-D1 | |||
Relay Terminal
| Appearance | Applicable Output Relay Terminals | Order code |
|---|---|---|
 |
G70D-VSOC16 | G70D-ET |
| G70D-VFOM16 |
Short Bar
| Appearance | Applicable Output Relay Terminals | Order code |
|---|---|---|
 |
G70D-VSOC16 | G6D-4-SB |
| G70D-VFOM16 |
Replacement Relays
| Applicable Output Relay Terminals | Rated voltage | Order code |
|---|---|---|
| G70D-VSOC16 | 24 V DC | G6D-1A-ASI-AP DC24 |
| G70D-VFOM16 | G3DZ-2R6PL DC24 |
Accessories for DIN Track Mounting
Refer to your OMRON website for details on the PFP-⬜.
Specifications
Relay Specifications
The following specifications apply to G6D Relays mounted in a G70D Relay Terminal and not the G6D Relay itself.
Coil Ratings (per G6D Relay)
| Rated voltage | 24 VDC |
| Rated current | 10.5 mA |
| Coil resistance | 2,880 Ω |
| Must-operate voltage | 70% max. of rated voltage |
| Must release voltage | 10% min. of rated voltage |
| Max. voltage | 130% of rated voltage |
| Power consumption | Approx. 200 mW |
Note:
- The must-operate voltage is 75% or less of the rated voltage if the relay is mounted upside down.
- Rated current and coil resistance were measured at a coil temperature of 23° C with a tolerance of ±10%.
- Operating characteristics were measured at a coil temperature of 23° C.
- The maximum allowable voltage is the maximum value of the allowable voltage range for the relay coil operating power supply. There is no continuous allowance.
- The rated current includes the terminal’s LED current.
Contact Ratings (per G6D Relay)
| Load | Resistive load (cosφ = 1) | |
| Rated load | 3 A at 250 VAC, 3 A at 30 VDC | |
| Rated carry current | 5 A | |
| Max. switching voltage | 250 VAC, 30 VDC | |
| Max. switching current | 5 A | |
| Max. switching capacity (reference value) | 1,250 VA, 150 W | |
| Min. permissible load (reference value) |
5 VDC, 1 mA | |
| Endurance | Electrical | 100,000 operations min. (under and at the rated load at 1,800 operations/h) |
| Mechanical | 20,000,000 operations min. (at 18,000 operations/h) |
|
Power MOSFET Relay Specifications
The following values apply to G3DZ Relays mounted in a G70D Output Block and not the G3DZ Relay itself.
Input (per G3DZ Power MOSFET Relay)
| Rated voltage | 24 VDC | |
| Operating voltage | 19.2 to 28.8 VDC | |
| Voltage level | Must-operate | 19.2 VDC max. |
| Must release | 1 VDC min. | |
| Input impedance | 4 kΩ±20% | |
| Rated current | 8.2 mA±20% | |
Note:The rated current includes the current consumption of the operation indicator.
Output (per G3DZ Power MOSFET Relay)
| Load voltage | 3 to 264 VAC, 3 to 125 VDC |
| Load current | 100 μA to 0.3 A |
| Inrush current | 6 A (10 ms) |
Characteristics
| Item | G70D-VSOC16 | G70D-VFOM16 |
|---|---|---|
| Relay outputs | Power MOSFET Relay outputs | |
| Contact configuration | 16 points (SPST-NO × 16) | |
| Contact structure | Single | – |
| Contact resistance | 100 mW max. | – |
| Isolation method | – | Photocoupler |
| Must-operate time | 10 ms max. | 10 ms max. |
| Release time | 10 ms max. | 15 ms max. |
| Output ON-resistance | – | 2.4 W max. |
| Open-circuit leakage current | – | 10 mA max. (at 125 V DC) |
| Max. switching frequency | Mechanical: 18,000 operations/h
Rated load: 1,800 operations/h |
– |
| Insulation resistance | 100 MW min. (at 500 V DC) | |
| Dielectric strength | 2,000 V AC for 1 min between coil and contact | 2,000 V AC for 1 min between input and output terminals |
| Noise immunity | Power input (normal mode): 600 V for 10 min with a pulse width of 100 ns to 1 ms
Power input (common mode): 1.5 kV for 10 min with a pulse width of 100 ns to 1 ms Input cable (coiling): 1.5 kV for 10 min with a pulse width of 100 ns to 1 ms Unit body (coiling): 600 V for 10 min with a pulse width of 100 ns to 1 ms |
|
| Vibration resistance | Destruction: 10 to 55 to 10 Hz, 0.5-mm amplitude (1.0-mm double)
Malfunction: 10 to 55 to 10 Hz, 0.375-mm amplitude (0.75-mm double) |
|
| Shock resistance | Destruction: 300 m/s2, Malfunction: 100 m/s2 | |
| Operating voltage range | 24 V DC +10%/–15% | |
| Current consumption | Approx. 170 mA at 24 V DC | Approx. 125 mA at 24 V DC |
| Cable length | Between block and controller: 5 m max. (reference value for AWG28)
Between block and external device: Dependent on load |
|
| LED color | Operation indicator: orange | |
| Coil surge absorber | Diode (600 V, 1 A) | |
| Ambient temperature | Operating: -25 to 55°C (with no icing or condensation) | |
| Ambient humidity | Operating: 45% to 85% | |
| Mounting strength | No damage when 49 N pull load was applied for 1 s in all directions (except for 9.8 N in direction of rail) | |
| Terminal strength | Tightening torque: 0.78 to 118 N·m
Pull strength: 49 N for 1 min |
|
| Weight | Approx. 280 g | |
Note:These values are initial values.
