F3S-TGR-N_X

Ex bölgeler için reed tip
kontaksız kapı switch’i

Patlamaya dayanıklı reed tip kontaksız switch’ler, patlayıcı ortamlardaki petrokimyasal uygulamalar ve gıda uygulamalarındaki güvenlik kapılarının durumunu izler.

Reed teknolojisi tabanlı
En fazla 6 switch seri olarak bağlanır
Tüm OMRON emniyet kontrolörleriyle çalışır
Paslanmaz çelik uyumluların arkasında çalışır
Kontaksız – aşınmasız – partikülsüz
Mekanik toleransların dengelenmesi
IP69K sebebiyle yüksek basınçla temizleme ve CIP/SIP prosesleri için uygundur (kablolu tipler)
EN ISO13849-1’e göre PLe’ye kadar olan emniyet kategorileriyle uyumludur

İLETİŞİM

Telefon : 0 (232) 449 21 00 | E-posta : satis@hatelgas.com.tr

Description

Özellikler ve sipariş bilgisi

Ordering information

Elongated sensors

Type	Cable connection	Contact configuration	Order code
	5 m pre-wired	2NC/1NO	F3S-TGR-NLMX-21-05
	10 m pre-wired	2NC/1NO	F3S-TGR-NLMX-21-10

Barrel sensors

Type	Cable connection	Contact configuration	Order code
	5 m pre-wired	2NC/1NO	F3S-TGR-NBMX-21-05
	10 m pre-wired	2NC/1NO	F3S-TGR-NBMX-21-10

Specifications

Mechanical data

		Elongated sensors
Serial switching		up to 6 pcs.
Indicator	–	None
Operating distance	OFF  ON (Sao)	10 mm close
Operating distance	ON  OFF (Sar)	22 mm open
Actuator approach speed	Min. Max.	4 mm/s 1000 mm/s
Operating temperature	–	-20°C to +60°C
Enclosure protection	Flying lead	IP 67 Certification for IP67 but can be used for SIP/CIP and high pressure cleaning like IP69K)
Material	–	Stainless steel 316

Electrical data

			Elongated sensors
Sensor technology		–	Reed
Power supply		–	24 VDC±15%
Switching current		Min.	1 mA, 10 VDC
Rated loads	NC contacts NO contact	Max.	0.6 A, 230 VAC/24 VDC (internally fused) 0.2 A, 230 VAC/24 VDC

Ex specification


II 2G Ex mb IIC T6Gb, II 2D Ex mb IIC T80 Db IP67* (*Product is fully encapsulated which is considered to provide Ingress Protection to at least IP67)
Zones 1 and 2 (Gas), Zones 21 and 22 (Dust) (An area where Gas and Dust is likely to occur in use)
IEC/EN 60079-0, IEC/EN 60079-18

II 2G Ex mb IIC T6Gb, II 2D Ex mb IIC T80 Db IP67*
(*Product is fully encapsulated which is considered to provide Ingress Protection to at least IP67)

Zones 1 and 2 (Gas), Zones 21 and 22 (Dust)

(An area where Gas and Dust is likely to occur in use)

IEC/EN 60079-0, IEC/EN 60079-18

Approved standards

EN standards certified by TÜV Rheinland
EN ISO 13849-1
EN 60204-1
EN 62061
EN ISO 14119
EN/IEC 60947-5-3
UL 508, CSA C22.2
BS 5304
EN 1088-1

Accessories

		Order code
Actuators	for F3S-TGR-NLMX	F39-TGR-NLMX-A
Actuators	for F3S-TGR-NBMX	F39-TGR-NBMX-A
Mounting screws	Set of Torx safety screws (M4, 4 × 30 mm, 4 × 20 mm, 4 × 10 mm; incl. washers and Torx bit)	F39-TGR-N-Screws
Spacer (8 mm, Set of 2pcs.) 1	for F3S-TGR-NLMX	F39-TGR-NLR-SPACER

Wiring examples (Single head connection)

G9SA

Single sensor application with G9SA-301
(up to PLe acc. EN ISO 13849-1)