Açıklama
Özellikler ve sipariş bilgisi
Ordering Information
Sensors
Appearance | Applicable fluid | Rated pressure range | Control output | Communication method | IO-Link baud rate | Order code |
---|---|---|---|---|---|---|
Liquid and gas | -0.1 to 1 MPa | PNP | IO-Link Analog |
COM2 (38.4 kbps) | E8PC-010D-E | |
COM3 (230.4 kbps) | E8PC-010T-E | |||||
NPN | Analog | – | E8PC-010-E | |||
Liquid | 0 to 10 MPa | PNP | IO-Link Analog |
COM2 (38.4 kbps) | E8PC-100D-E | |
COM3 (230.4 kbps) | E8PC-100T-E | |||||
NPN | Analog | – | E8PC-100-E | |||
0 to 40 MPa | PNP | IO-Link Analog |
COM2 (38.4 kbps) | E8PC-400D-E | ||
COM3 (230.4 kbps) | E8PC-400T-E | |||||
NPN | Analog | – | E8PC-400-E |
Note:Please contact your OMRON sales representative regarding the IO-Link setup file (IODD file).
Adapters
It must be selected from the adapters below.
Appearance | Type | Nominal diameter of thread | Thread type | Materials | Order code | |
---|---|---|---|---|---|---|
Nominal diameter A | Nominal diameter B | |||||
R1/8 male | 6 A | 1/8″ | R (taper thread) | SUS304 | E8PC-YA-A18 | |
R1/4 male | 8 A | 1/4″ | R (taper thread) | SUS304 | E8PC-YA-A14 | |
R3/8 male | 10 A | 3/8″ | R (taper thread) | SUS304 | E8PC-YA-A38 | |
G1/4 female | 8 A | 1/4″ | G (parallel thread) | SUS304 | E8PC-YA-B14N | |
NPT1/8 male | 6 A | 1/8″ | NPT (taper thread) | SUS304 | E8PC-YA-C18 | |
NPT1/2 male | 8 A | 1/4″ | NPT (taper thread) | SUS304 | E8PC-YA-C14 |
Cables (Sensor I/O Connectors)
A Cable is not provided with the Sensor. It must be ordered separately.
Type | Appearance | Cable | Order code |
---|---|---|---|
Socket on one cable end | Straight | 2 m | XS5F-D421-D80-F |
5 m | XS5F-D421-G80-F | ||
L-shaped | 2 m | XS5F-D422-D80-F | |
5 m | XS5F-D422-G80-F | ||
Socket and plug on cable ends | Straight/straight | 2 m | XS5W-D421-D81-F |
5 m | XS5W-D421-G81-F | ||
L-shaped/l-shaped | 2 m | XS5W-D422-D81-F | |
5 m | XS5W-D422-G81-F |
Note:Refer to Sensor I/O Connector/Sensor Controller on your OMRON website for details.
Throttle (for replacement)
If the excessive pulsation or surge voltage is expected, use a throttle. Install it inside the adapter and use.
Appearance | Type | Material | Order code | Installation method |
---|---|---|---|---|
For a male adapter | SUS304 | E8PC-YS | ||
For a female adapter | SUS304 | E8PC-YS-N |
O-ring (for replacement)
Appearance | Type | Order code |
---|---|---|
For E8PC-010⬜ | E8PC-YL-1 | |
For E8PC-100⬜/-400⬜ | E8PC-YL-2 | |
Female for adapter G1/4 | E8PC-YL-3 |
Specifications
Sensors
Model | PNP(COM2) | E8PC-010D-E | E8PC-100D-E | E8PC-400D-E |
---|---|---|---|---|
PNP(COM3) | E8PC-010T-E | E8PC-100T-E | E8PC-400T-E | |
NPN | E8PC-010-E | E8PC-100-E | E8PC-400-E | |
Pressure monitoring |
Rated pressure range | –0.1 to 1 MPa | 0 to 10 MPa | 0 to 40 MPa |
Display range | –0.20 to 1.10 MPa | –0.10 to 11.00 MPa | –0.10 to 44.00 MPa | |
Withstand pressure | 4 MPa | 30 MPa | 50 MPa | |
Burst pressure | 8 MPa | 60 MPa | 80 MPa | |
Display resolution | 0.001 MPa | 0.01 MPa | 0.01 MPa | |
Applicable fluid temperature | –20 to +100°C (no icing or condensation) | |||
Pressure response time | Control output: Select 3 to 6000 ms Analog output: Set value + 2 ms (90% response) | |||
Pressure monitoring precision | ±1.0% of F.S. or less | |||
Pressure repeatability | ±0.3% of F.S. or less | |||
Ambient temperature characteristics | ±0.6% of F.S./10°C | |||
Hysteresis | Variable | |||
Pressure type | Gauge pressure | |||
Temperature monitoring |
Temperature monitoring rated range | –20 to 100°C | ||
Temperature monitoring precision | ±4°C | |||
Temperature repeatability | ±1°C | |||
Control output judgment (selectable) |
Standard mode | Judge if the measured value is the threshold value or more (or less). | ||
Window mode | Judge if the measured value is within the upper and lower limits. | |||
Compatible fluid | Gas and fluid not corroding the material of the wetted part (such as water, glycol solution, and oil) | |||
Display method | Numerical value indication: 4-digit 7-segment white LED with inverting function Status indicator: Normal operation (green), status indication (orange), and error (red) The content of status indication is selectable. Output indicator: OUT1 operation (orange), OUT2 operation (orange) Unit indication: E8PC-⬜⬜⬜⬜: MPa (white), E8PC-⬜⬜⬜⬜-E: MPa (white), bar (white), psi (white), °C (white) IO-Link indicator: Lighting when communications are in progress (green) |
|||
Delay setting | 1 to 9999 ms (Select a function from invalid, ON delay, OFF delay, and one-shot.) |
|||
Connection method | M12, 4-pole connector type | |||
Connecting diameter | G3/4 male (Use the optional adapter to convert the diameter) Connection strength 20 N·m | |||
Output ch1 (selectable) |
Control output | Pressure control output (N.O./N.C.) E8PC-⬜⬜⬜D/T: PNP E8PC-⬜⬜: NPN 30 VDC or less, Class 2, max. 100 mA, residual voltage 1 V or less |
||
Output ch2 (selectable) |
Control output | Pressure control output (N.O./N.C.) / temperature control output (N.O./N.C.) E8PC-⬜⬜⬜D/T: PNP E8PC-⬜⬜: NPN 30 VDC or less, Class 2, 100 mA max., residual voltage 1 V or less |
||
Analog current output | Pressure analog output / Temperature analog output Current output 4 to 20 mA (maximum load resistance 350Ω or less) (Display value ± 2% of F.S.) |
|||
External input | One-point teaching, zero point adjustment input (selectable, initial status: invalid) short-circuit current 1.5 mA or less, input time 20 ms or more |
|||
IO-Link | IO-Link specification | Ver 1.1 | ||
Baud rate | E8PC-⬜⬜⬜D: COM2 (38.4kbps) E8PC-⬜⬜⬜T: COM3 (230.4Kbps) |
|||
Data length | PD Size: 6 byte OD Size: 1 byte (M-sequence type: TYPE_2_V) |
|||
Minimum cycle time | E8PC-⬜⬜⬜D (COM2): 3.2 ms E8PC-⬜⬜⬜T (COM3): 2.0 ms |
|||
Power supply | Power supply voltage | 10 to 30 VDC (including 10% ripple (p-p)), Class 2 | ||
Power consumption | 1,200 mW or less (When power supply voltage is 30 V, current consumption must be 40 mA or less. When power supply voltage is 10 V, current consumption must be 120 mA or less.) |
|||
Protection circuit | Power supply reverse connection protection, output short-circuit protection, and output reverse connection protection | |||
Environment resistance |
Ambient temperature range | –20 to 80°C in operation and storage, respectively (no condensation) | ||
Ambient humidity range | –35 to 85%RH in operation and storage, respectively (no condensation) | |||
Vibration resistance (destruction) |
1000 VAC, 50/60 Hz, 1 min. between current-carrying parts and case | |||
Shock resistance (destruction) |
10 to 2000 Hz, double amplitude 1.5 mm, 2 hours in X/Y/Z direction each | |||
Impact (endurance) | 500 m/s2, three times in X/Y/Z direction each | |||
Protective structure | IP67 | |||
Pollution degree | 3 | |||
Altitude | 2,000 m or less | |||
Installation place | Indoor | |||
Material | Wetted part | Pressure port: SUS304L, diaphragm pressure port: Al2O3 (alumina), O-ring: FKM | ||
Other than wetted part | Head: PPSU, display unit: PES, button: PBT, chassis: SUS304L | |||
Weight | Approx.190 g | |||
Accessories |
|
Dimensions
Sensors
IoT Pressure Sensor E8PC-⬜⬜⬜-E
Adapter
E8PC-YA-A⬜⬜, E8PC-YA-C⬜⬜
Model | E8PC-YA-A18 | E8PC-YA-A14 | E8PC-YA-A38 | E8PC-YA-C18 | E8PC-YA-C14 |
---|---|---|---|---|---|
Thread | G3/4×R1/8 | G3/4×R1/4 | G3/4×R3/8 | G3/4×NPT1/8 | G3/4×NPT1/4 |
A | 43.3 | 47.1 | 47.6 | 43.3 | 47.1 |
B | 21.1 | ||||
C | 13 | ||||
D | 9.2 | 13 | 13.5 | 9.2 | 13 |
E | 34 | ||||
F | 3.7 | 4.8 | 5 | 3.7 | 4.8 |
G | 17 | 17 | 19 | 17 | 17 |
E8PC-YA-B14N
Throttle
E8PC-YS
E8PC-YS-N
O-ring
E8PC-YL-1
E8PC-YL-2
E8PC-YL-3
Cable
Please refer to E8FC.